Open Mon-Fri 8am-7pm, Sat 8am-5pm
Heat and cool a garage, an addition, an office or the room your ductwork never reached. Most of our mini-split installs in the last 12 months came in between $3,800 and $5,400, installed.
562+ 5-star reviews on Google · Family-owned since 1995
The Dowd team. Family-owned in Tulsa since 1995.
Where a Mini-Split Fits
A mini-split is a small heat pump with its own indoor head, no ductwork needed. These are the spaces it shows up in on our job list.
Garage offices, home gyms, garage apartments and workshops. The space your central system was never built to reach.
A sunroom, a finished attic or a bonus room over the garage, without stretching ductwork the existing system can't handle.
Comfortable all day without running the whole house's system for one room.
An upstairs bedroom or a room at the end of a long duct run that never keeps up in July.
Plenty of older Tulsa houses were built before central air, with plaster walls, tight attics and no good path for new ductwork. A mini-split only needs a small hole through the wall for the refrigerant lines, so you can cool and heat those rooms without tearing into plaster or giving up closet space for duct chases.
If the whole house needs heating and cooling and the ductwork is in decent shape, a central system usually costs less per room than putting a head in every room. We'll tell you that at the visit. Our whole-house replacement prices are published too.
Real Prices From Our Jobs
These are invoiced totals from our own mini-split jobs: equipment, labor and materials, before any rebate. Not a sales range, not a national average.
| Job type | What we've charged |
|---|---|
| One room, 12,000 to 24,000 BTU (Gree Livo or Mitsubishi) | Most between $3,800 and $5,400; middle job about $4,600 |
| Larger single room or garage, 30,000 BTU | About $5,500 (2026) |
| Three indoor heads on one system | $6,000 (2024) |
| Cold-climate Mitsubishi Hyper Heat, 24,000 BTU | About $9,100 (2026) |
| Large 3-ton (36,000 BTU) system | $14,200 (Mitsubishi, 2024) |
| Install only: you already bought the equipment | $2,484 for two heads with line-set covers and a pad, electrical not included (2026) |
Source: the 20 mini-split jobs in our records from November 2022 to August 2026; "most between" is the middle half of the 10 installs from the last 12 months. Checked October 2026. Your price depends on your space, so we quote in writing after a visit.
The Equipment
On most of our mini-split installs since 2025.
When the room needs to hold heat on the coldest nights.
Thinking about a heat pump for the whole house instead? Read our heat pump vs gas furnace guide for Tulsa homes, or our guide to mini-splits for garages and additions. Or see a mini-split heat pump we installed in Tulsa instead of new ductwork.
How It Goes
Size, insulation, windows, where the indoor head can go and where the outdoor unit and its electrical can sit. We photograph it so the quote matches the room.
Equipment, size, line-set route and electrical, all on one quote. No pressure: decide when you're ready.
We mount the indoor head, run the refrigerant lines, drain and control wire through the wall, set the outdoor unit on a pad or wall bracket, wire its circuit and disconnect, then pull a vacuum on the lines before we charge and start it.
Remote settings, the heat and cool modes, and how to slide out and rinse the filters.
Rebates
PSO pays rebates on qualifying heat pumps, and a mini-split is a heat pump. A 2023 Mitsubishi mini-split we installed qualified for an $800 PSO rebate. Whether yours does depends on the model's efficiency, what it replaces and the program rules at the time, so we check before we promise anything. Dowd is on PSO's list of participating contractors.
How the PSO heat pump rebate works"Had them finish an install of my mini split in my office, they did a very clean install and they were very friendly and professional."
Questions
Most of the mini-split installs we did in the last 12 months came in between about $3,800 and $5,400 for equipment, labor and materials, with a middle job around $4,600. More heads, a cold-climate model or a long line-set run cost more: a three-head system we installed in 2024 was $6,000, and a Mitsubishi Hyper Heat install this summer was about $9,100. We give you a written price after we see the room.
Yes. Every mini-split we install is a heat pump, so it heats as well as cools. Standard models handle most Tulsa winter days. If the room needs dependable heat on the coldest nights, ask about a cold-climate model such as Mitsubishi Hyper Heat, which is built to keep heating at much lower outdoor temperatures.
Yes, garages are one of the most common places we install them, from a garage office to a garage apartment. We size it for the space, which usually means a larger unit than for a bedroom because garage doors and walls lose more heat.
Yes. A multi-zone system runs two or more indoor heads from one outdoor unit, each with its own temperature. It costs more than a single-room system but less than separate systems for each room.
Rinse the indoor filters about once a month while you are using it; they slide out by hand. Keep leaves and grass clear of the outdoor unit. A yearly professional cleaning of the indoor coil and blower keeps it running quietly and efficiently.
Sometimes. PSO pays rebates on qualifying heat pumps, and a 2023 Mitsubishi mini-split we installed qualified for an $800 PSO rebate. The rules depend on the model and on what it replaces, and they change, so we check your system against the current PSO program before we promise anything. The federal tax credit for heat pumps ended at the end of 2025.
Most of our recent installs are Gree Livo, in sizes from 12,000 to 36,000 BTU. We also install Mitsubishi, including the Hyper Heat line for rooms that need strong winter heat. We recommend one after we see the space.
Tell us about the room. We'll call to set up a visit, look at the space and give you a written price. If a mini-split isn't the right fit, we'll say so.
We'll call you back within 1 business hour.